Power output was tested at 1MHz (45dBc) and 200 MHz (44dBc). Total Harmonic Distortion was 0.31% at 30 dBm output.
This instrument can be delivered with a fresh calibration at additional cost. See details here. Please inquire if interested.
We offer a 5-day right of refusal as well as 90-day warranty against defects. Complete terms can be found here.
This ruggedized High Power Amplifier is capable of delivering 30W output signals across its entire operating bandwidth, from 0.1-200 MHz. Extensive safety features to prevent amplifier damage include over-temperature protection and the ability to handle short and open loads. The LZY-22+, including heat-sink and cooling fan, is designed for a 24V/5.5A DC power supply.
|30 W Output Power @ 3 dB compression across 0.1-200 MHz bandwidth||High power output across broad frequency range supports a wide array of applications, from avionics, broadcasting, medical, and high-power lab testing to marine band, public safety, and aircraft communications|
|High Gain, 43 dB typ.||High, consistent gain across entire operating range (flatness ±1.36 dB) for predictable performance and signal level strength|
|Blanking Isolation 70dB||Manual or TTL-controlled signal blanking (OFF 0.4 ms; ON 64 ms)|
|Internal open/short Protection Circuitry||Antenna mismatches or damaged output cables will not cause amplifier damage|
|Overheat Protection||Automatic shutdown at baseplate temperature of +85 ± 5°C prevents thermal runaway, even during remote, unmonitored operation in difficult thermal environments.|
|Unconditionally Stable||No risk of damage to other components from impedance mismatch or internal oscillations|
Please note: Any test equipment depicted other than that listed below is for demonstration purposes and is not included in the sale.
What’s In The Box
- Mini-Circuits LZY-22+ RF Amplifier with attached heat sink