Tested for output (See report here). This instrument can be delivered with a fresh calibration at additional cost. See details here. Please inquire if interested.
We offer a 5-day right of refusal as well as 90-day warranty against defects. Complete terms can be found here.
Four isolated outputs (2-25W & 2-50W) are integrated into one package, conserving rack space and GPIB addresses. Dual ranges allow for more current at lower voltage levels. The outputs can be connected in parallel or series to further increase the flexibility that these products offer the system designer. Programming is done using industry standard SCPI commands and test system integration can be further simplified be using the VXIPlug&Play drivers. These power supplies help reduce test time with fast up and down pro- gramming, which is enhanced by the active down-programmer which can sink the full rated current.
|0-7V, 15mA||0-16V, 200 mA|
|0-50V, 0.5 A||0-50V, 1 A|
|0-16V, 2 A|
Programming accuracy at 25°C ±5°C
- Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high)
- Voltage 50W: 0.016% + 53 mV (low), 10 mV (high)
- Current 25W: 0.04% + 15 µA (low), 100 µA (high)
- Current 50W: 0.04% + 185 µA (low), 500 µA (high)
- Ripple & noise (20 Hz to 20 MHz) 2 outputs each
- Voltage rms: 500 µV
- Peak-to-peak: 3 mV
- Current rms: 0.1 mA
Please note: Any test equipment depicted other than that listed below is for demonstration purposes and is not included in the sale.
What’s In The Box
- HP 6626A Power Supply